Author Topic: Модуль Cisco Catalyst VS-S720-10G-3C трапается при загрузке  (Read 7078 times)

0 Members and 1 Guest are viewing this topic.

Offline Static

  • Newbie
  • *
  • Posts: 10
  • Karma: +1/-0
После отключения питания не могу загрузить Cisco 6506-E. Загружается SP, загружается RP. Запускает тест платы и трапается, вываливаясь в ROMMON RP. Есть подозрение, что проблема с памятью RP 64MB-Cisco boot flash BF-S720-64MB-RP

Если у кого-то есть возможность с данного SUP дать потестировать память, буду очень благодарен

Offline zhenya

  • Administrator
  • Full Member
  • *****
  • Posts: 214
  • Karma: +14/-5
полный лог в студию.

и стоит глянуть на http://www.cisco.com/c/en/us/support/docs/field-notices/637/fn63743.html
« Last Edit: August 01, 2017, 22:44:08 by zhenya »

Offline Static

  • Newbie
  • *
  • Posts: 10
  • Karma: +1/-0
Code: [Select]
System Bootstrap, Version 8.5(4)
Copyright (c) 1994-2009 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

Autoboot executing command: "boot bootdisk:"

Initializing ATA monitor library...
string is bootdisk:s72033-ipbase-mz.122-33.SXI4a.bin
Loading image, please wait ...


Initializing ATA monitor library...

Self extracting the image... [OK]
Self decompressing the image :
###############################################################################################
########################################################################################################
[OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASE-M), Version
12.2(33)SXI4a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 16-Jul-10 20:18 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x4231D1F0


*Jan  4 16:13:35.639: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure
console debugging output.


Firmware compiled 22-Apr-10 14:56 by integ Build [100]




*Jan  4 16:13:32.395: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for
this switch

*Jan  4 16:13:35.639: %OIR-SP-6-CONSOLE: Changing console ownership to route
processor



System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 1048576 Kbytes of main memory

Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Completed! Booting the image.
Self decompressing the image :
###############################################################################################
##############################################################################################################################
############################################################### [OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASE-M), Version
12.2(33)SXI4a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 16-Jul-10 19:51 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x433A10B0

cisco WS-C6506-E (R7000) processor (revision 1.2) with 983008K/65536K bytes of
memory.
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 Virtual Ethernet interface
17 Gigabit Ethernet interfaces
10 Ten Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

         --- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no
*Jan  4 16:13:51.011: RP: Currently running ROMMON from S (Gold) region
*Jan  4 16:13:51.835: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for
type vlan. The Bridge IDs of all active STP insta
nces have been updated, which might change the spanning tree topology
*Jan  4 16:16:03.343: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASE-M), Version
12.2(33)SXI4a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 16-Jul-10 19:51 by prod_rel_team


Press RETURN to get started!


*Jan  4 16:13:36.007: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00
to ensure console debugging output.
*Jan  4 16:13:48.155: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled
for type vlan. The Bridge IDs of all active STP in
stances have been updated, which might change the spanning tree topology
*Jan  4 16:13:48.163: SP: SP: Currently running ROMMON from S (Gold) region
*Jan  4 16:13:53.959: %C6K_PLATFORM-SP-4-CONFREG_BREAK_ENABLED: The default
factory setting for config register is 0x2102.It i
s advisable to retain 1 in 0x2102 as it prevents returning to ROMMON when
break is issued.
*Jan  4 16:16:02.087: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Jan  4 16:16:02.091: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Jan  4 16:16:02.223: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Jan  4 16:16:02.267: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
*Jan  4 16:16:02.295: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy
mode, system is operating on both power supplies
.
*Jan  4 16:16:02.575: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASE-M), Version
12.2(33)SXI4a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 16-Jul-10 20:18 by prod_rel_team
*Jan  4 16:16:07.763: %C6KENV-SP-4-FANHPMODE: Fan-tray 1 is operating in high
power mode
*Jan  4 16:16:10.635: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for
the fabric in slot 5.
*Jan  4 16:16:10.635: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric
Module in slot 5 became active.
*Jan  4 16:16:14.041: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal
Diagnostics...

%Software-forced reload

 Early Notification of crash condition..

 16:16:33 UTC Tue Jan 4 2000: Breakpoint exception, CPU signal 23, PC =
0x411C6EDC



--------------------------------------------------------------------
   Possible software fault. Upon reccurence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 411C6EDC 411C4A30 40E25A7C 40E25AA8 40C35BC0 40CB5E0C 40CB5E68
41B80E8C 41B81D5C 41B81C7C 41B82A50 40DA03FC 40D91E
E0 40D920FC 411B965C
$0 : 00000000, AT : 43890000, v0 : 45290000, v1 : 00000000
a0 : 46B45218, a1 : 0000F100, a2 : 00000000, a3 : 00000000
t0 : 00000020, t1 : 3400F101, t2 : 3400C100, t3 : FFFF00FF
t4 : 411B9E38, t5 : 5000DAB0, t6 : 00000000, t7 : 0000625C
s0 : 00000000, s1 : 43590000, s2 : 465770E4, s3 : 0000001F
s4 : 465770E4, s5 : 50DBB0C8, s6 : 00000000, s7 : 08FABFC8
t8 : 08028FEC, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 4389A878, sp : 5000DBB0, s8 : 00000000, ra : 411C4A30
EPC  : 411C6EDC, ErrorEPC : A0000680, SREG     : 3400F103
MDLO : 00000000, MDHI     : 00000000, BadVaddr : 00000000
DATA_START : 0x433A10B0
Cause 00000824 (Code 0x9): Breakpoint exception

Writing crashinfo to bootflash:crashinfo_20000104-161633-UTC

=== Flushing messages (16:16:33 UTC Tue Jan 4 2000) ===

Buffered messages:

*Jan  4 16:13:51.011: RP: Currently running ROMMON from S (Gold) region
*Jan  4 16:13:51.835: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for
type vlan. The Bridge IDs of all active STP insta
nces have been updated, which might change the spanning tree topology
*Jan  4 16:16:03.343: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASE-M), Version
12.2(33)SXI4a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 16-Jul-10 19:51 by prod_rel_team
*Jan  4 16:13:36.007: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00
to ensure console debugging output.
*Jan  4 16:13:48.155: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled
for type vlan. The Bridge IDs of all active STP in
stances have been updated, which might change the spanning tree topology
*Jan  4 16:13:48.163: SP: SP: Currently running ROMMON from S (Gold) region
*Jan  4 16:13:53.959: %C6K_PLATFORM-SP-4-CONFREG_BREAK_ENABLED: The default
factory setting for config register is 0x2102.It i
s advisable to retain 1 in 0x2102 as it prevents returning to ROMMON when
break is issued.
*Jan  4 16:16:02.087: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Jan  4 16:16:02.091: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Jan  4 16:16:02.223: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Jan  4 16:16:02.267: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
*Jan  4 16:16:02.295: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy
mode, system is operating on both power supplies
.
*Jan  4 16:16:02.575: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASE-M), Version
12.2(33)SXI4a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 16-Jul-10 20:18 by prod_rel_team
*Jan  4 16:16:07.763: %C6KENV-SP-4-FANHPMODE: Fan-tray 1 is operating in high
power mode
*Jan  4 16:16:10.635: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for
the fabric in slot 5.
*Jan  4 16:16:10.635: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric
Module in slot 5 became active.
*Jan  4 16:16:14.041: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal
Diagnostics...
Queued messages:
*Jan  4 16:16:36.007: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console
debugging output.

*Jan  4 16:16:33.427: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has
failed due to exception , reset by [5/0]
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x4528ba34
  PC = 0x411b9e94, SP = 0x435967d0, RA = 0x42435be0
  Cause Reg = 0x00003820, Status Reg = 0x34008002
rommon 1 >
« Last Edit: August 08, 2017, 08:40:38 by Unit »

Offline zhenya

  • Administrator
  • Full Member
  • *****
  • Posts: 214
  • Karma: +14/-5
bootflash:crashinfo_20000104-161633-UTC
достань с флэшки.
ИМХО ТРУП

Можете попробовать на флэшку закинуть иос поновее.
« Last Edit: August 07, 2017, 22:20:54 by zhenya »